smart-home

Commit Graph

Автор	SHA1	Съобщение	Дата
Bernd Gottschlag	05696f7e74	Fix decryption bug	преди 5 години
Bernd Gottschlag	1381cb6634	Add encryption for the sent packet	преди 5 години
Bernd Gottschlag	3a21aef881	Rework the makefile and optimize the code for flash space	преди 5 години
Bernd Gottschlag	8a49c011c9	Update packet protocoll	преди 5 години
Bernd Gottschlag	58a48e5230	Fix order of the element count and packet type bit field	преди 5 години
Bernd Gottschlag	e435620c91	Add a new packet format with the calculation of the CRC	преди 5 години
Bernd Gottschlag	c86399b66e	Add the calculation of a crc The algorith used is for the CRC-16-CCITT, also known as CRC-KERMIT.	преди 5 години
Bernd Gottschlag	30fe01bb9e	Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.	преди 5 години
Bernd Gottschlag	3dcfae6196	Change the way the TX and RX addresses are written to the nrf24l01	преди 5 години
Bernd Gottschlag	fa580c8af7	Add ToDos to the schematic Several issues were found after receiving the PCBs that should be rectified for the next version.	преди 5 години
Bernd Gottschlag	e7bfca4363	Use the IRQ signal from the nrf24l01 instead of polling the status This is done to avoid transmission erros as described in https://forum.mysensors.org/topic/10452/nrf24l01-communication-failure-root-cause-and-solution	преди 5 години
Bernd Gottschlag	f7bfdf101c	Add definitions of the IRQ pin to the nrf24l01	преди 5 години
Bernd Gottschlag	1dd0f89149	Fix pin definitions of the interface to the nrf24l01	преди 5 години
Bernd Gottschlag	011303042b	Remove a variable that caused a compiler warning	преди 5 години
Bernd Gottschlag	f1b0ebf618	Move SPI initialization and pin definitions to spi.c	преди 5 години
Bernd Gottschlag	204ff8d220	Add power save mode and send messages every 7.5s	преди 5 години
Bernd Gottschlag	0c03c24fcd	Change the MCU to the Atmega88 The pin definitions are updated and the uart debug interface is removed as it is not present on the actual board.	преди 5 години
Bernd Gottschlag	ddb5b0426e	Send the data from the BME280 with the NRF24L01	преди 5 години
Bernd Gottschlag	01dff7cfd3	Use spi functions	преди 5 години
Bernd Gottschlag	93fd7841a9	Use spi functions	преди 5 години
Bernd Gottschlag	9d1b611356	Use dedicated function to read the status register when transmitting	преди 5 години
Bernd Gottschlag	fc26a37348	Set the transmission retries and time-out duration to each maximum	преди 5 години
Bernd Gottschlag	b9cfc34e94	Flush TX FIFO after an unsuccessful transmission	преди 5 години
Bernd Gottschlag	45f19e8c43	Fix register struct definitions	преди 5 години
Bernd Gottschlag	5ee6bbbf1a	Add SPI interface functions	преди 5 години
Bernd Gottschlag	7f1da0221c	Update .gitignore	преди 5 години
Bernd Gottschlag	e5ad15dbfa	Add reading from the BME280 using the official API Currently the data values are written to the debug output.	преди 5 години
Bernd Gottschlag	780cedcbc4	Fix order of the bit fields of the register definitions	преди 5 години
Bernd Gottschlag	278f7f23fe	WIP: use register definitions to access them	преди 5 години
Bernd Gottschlag	b487ab67f6	Add nRF24L01 register definitions	преди 5 години
Bernd Gottschlag	33e1d5e700	WIP tidy up the NRF24L01 code	преди 5 години
Bernd Gottschlag	347211065c	Add prototyping code for sending a dummy message with the nrf24l01 The firmware is developed using an aduino micro pro with an atmega32u4 as the hardware for the weather station is not ready yet.	преди 5 години
Bernd Gottschlag	daf929f3d2	Add digikey link for a part	преди 5 години
Bernd Gottschlag	cab19c7994	Fix kicad library paths	преди 5 години
Bernd Gottschlag	086986e6b5	Rename schematics folder to match the structure of the base station	преди 5 години
Bernd Gottschlag	80e31fe6bc	Move the schematics to seperate folder	преди 5 години
Bernd Gottschlag	443b4a39dd	Fix spelling of a symbol field	преди 5 години
Bernd Gottschlag	bd4eb8047e	Add correct ESD diode	преди 5 години
Bernd Gottschlag	b0ca0c2284	Exchange the ESD diode for one with the correct package	преди 5 години
Bernd Gottschlag	222278a85e	Fix location of markings	преди 5 години
Bernd Gottschlag	efbb38a9b4	Add a LED for debugging and fix some errors	преди 5 години
Bernd Gottschlag	81f222b526	Add the dip switch to the PCB	преди 5 години
Bernd Gottschlag	648257be03	Add a dip switch and the associated footprint	преди 5 години
Bernd Gottschlag	90a300850b	Fix library paths	преди 5 години
Bernd Gottschlag	a42e16a21c	Correct position of markings	преди 5 години
Bernd Gottschlag	fd27eaa80e	Add project specific KiCad library	преди 5 години

47 Ревизии (9070abc2b0ab405980c25a43b5f102aff2fd8e1b)