smart-home

Автор	SHA1	Сообщение	Дата
Bernd Gottschlag	8a49c011c9	Update packet protocoll	5 лет назад
Bernd Gottschlag	58a48e5230	Fix order of the element count and packet type bit field	5 лет назад
Bernd Gottschlag	e435620c91	Add a new packet format with the calculation of the CRC	5 лет назад
Bernd Gottschlag	c86399b66e	Add the calculation of a crc The algorith used is for the CRC-16-CCITT, also known as CRC-KERMIT.	5 лет назад
Bernd Gottschlag	30fe01bb9e	Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.	5 лет назад
Bernd Gottschlag	3dcfae6196	Change the way the TX and RX addresses are written to the nrf24l01	5 лет назад
Bernd Gottschlag	fa580c8af7	Add ToDos to the schematic Several issues were found after receiving the PCBs that should be rectified for the next version.	5 лет назад
Bernd Gottschlag	e7bfca4363	Use the IRQ signal from the nrf24l01 instead of polling the status This is done to avoid transmission erros as described in https://forum.mysensors.org/topic/10452/nrf24l01-communication-failure-root-cause-and-solution	5 лет назад
Mathias Gottschlag	8f05bab10e	Implement reading values from the BME280.	5 лет назад
Mathias Gottschlag	7ad34f1038	Fix disabling display power.	5 лет назад
Mathias Gottschlag	3afa50a051	Rename display pins and group BME280 pins.	5 лет назад
Mathias Gottschlag	da228540d8	base-station: Simplify decryption.	5 лет назад
Bernd Gottschlag	ed128699b7	Implement cipher block chaining for the decryption of packets	5 лет назад
Mathias Gottschlag	62a7d7210a	display: Show dummy weather station values.	5 лет назад
Bernd Gottschlag	8f2658655e	Merge branch 'master' of git.gottschlag.net:bernd/smart-home	5 лет назад
Bernd Gottschlag	207868cdda	Add simple decryption of the data packets The cipher block chaining is not yet implemented	5 лет назад
Mathias Gottschlag	8a20cd3318	display: More drawing code.	5 лет назад
Mathias Gottschlag	86f451d51c	display: cargo update, and use tinygfx instead of embedded-epd library.	5 лет назад
Bernd Gottschlag	ae3b470844	Update packet handling protocol The packets are not yet encrypted	5 лет назад
Mathias Gottschlag	0d48079851	display: Restructure the program (with multiple software tasks).	5 лет назад
Mathias Gottschlag	e9f89f739f	display: Revert to simple EPD display example code.	5 лет назад
Mathias Gottschlag	d3cc04db76	display: Update toolchain.	5 лет назад
Mathias Gottschlag	a6b8646090	display: Fix pins/SPI and configure some default pin states.	5 лет назад
Mathias Gottschlag	ea8c4889f0	display: Fix project name and add epd-waveshare dependency.	5 лет назад
Bernd Gottschlag	dcd6ee4e24	Disable the MQTT connection	5 лет назад
Bernd Gottschlag	65f5893bc4	Change the address of the nrf24l01 and the packet format	5 лет назад
Bernd Gottschlag	a864df322d	Add further information to the README	5 лет назад
Mathias Gottschlag	9089fef433	Describe the remaining protocol.	5 лет назад
Mathias Gottschlag	1dde4df49d	More protocol description, enough to implement sensor reports.	5 лет назад
Mathias Gottschlag	3c0b03f73d	First part of protocol documentation.	5 лет назад
Bernd Gottschlag	b837785f8e	Add range checks for the received values and fix formatting	5 лет назад
Bernd Gottschlag	f7bfdf101c	Add definitions of the IRQ pin to the nrf24l01	5 лет назад
Bernd Gottschlag	1dd0f89149	Fix pin definitions of the interface to the nrf24l01	5 лет назад
Bernd Gottschlag	011303042b	Remove a variable that caused a compiler warning	5 лет назад
Bernd Gottschlag	f1b0ebf618	Move SPI initialization and pin definitions to spi.c	5 лет назад
Bernd Gottschlag	204ff8d220	Add power save mode and send messages every 7.5s	5 лет назад
Bernd Gottschlag	0c03c24fcd	Change the MCU to the Atmega88 The pin definitions are updated and the uart debug interface is removed as it is not present on the actual board.	5 лет назад
Bernd Gottschlag	ddb5b0426e	Send the data from the BME280 with the NRF24L01	5 лет назад
Bernd Gottschlag	01dff7cfd3	Use spi functions	5 лет назад
Bernd Gottschlag	93fd7841a9	Use spi functions	5 лет назад
Bernd Gottschlag	9d1b611356	Use dedicated function to read the status register when transmitting	5 лет назад
Bernd Gottschlag	fc26a37348	Set the transmission retries and time-out duration to each maximum	5 лет назад
Bernd Gottschlag	b9cfc34e94	Flush TX FIFO after an unsuccessful transmission	5 лет назад
Bernd Gottschlag	45f19e8c43	Fix register struct definitions	5 лет назад
Bernd Gottschlag	5ee6bbbf1a	Add SPI interface functions	5 лет назад
Bernd Gottschlag	7f1da0221c	Update .gitignore	5 лет назад
Bernd Gottschlag	e5ad15dbfa	Add reading from the BME280 using the official API Currently the data values are written to the debug output.	5 лет назад
Bernd Gottschlag	780cedcbc4	Fix order of the bit fields of the register definitions	5 лет назад
Bernd Gottschlag	278f7f23fe	WIP: use register definitions to access them	5 лет назад
Bernd Gottschlag	b487ab67f6	Add nRF24L01 register definitions	5 лет назад

Первая Предыдущая страница 1 2 3 Следующая страница Последняя

122 Коммиты (8a49c011c9d43693c480570682ada047cd954e4f) Все ветки Поиск

122 Коммиты (8a49c011c9d43693c480570682ada047cd954e4f)

Все ветки