smart-home

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Bernd Gottschlag	0d7211d770	Fix the rx0 address The address was set for the wrong address and thus the module could not receive acks from the base station	5 år sedan
Bernd Gottschlag	e6669484e6	Disable the dynamic packet length The packet length is now fixed to 32 bytes.	5 år sedan
Bernd Gottschlag	b10df03e01	Fix generation of the salt	5 år sedan
Bernd Gottschlag	05696f7e74	Fix decryption bug	5 år sedan
Bernd Gottschlag	1381cb6634	Add encryption for the sent packet	5 år sedan
Bernd Gottschlag	3a21aef881	Rework the makefile and optimize the code for flash space	5 år sedan
Bernd Gottschlag	8a49c011c9	Update packet protocoll	5 år sedan
Bernd Gottschlag	58a48e5230	Fix order of the element count and packet type bit field	5 år sedan
Bernd Gottschlag	e435620c91	Add a new packet format with the calculation of the CRC	5 år sedan
Bernd Gottschlag	c86399b66e	Add the calculation of a crc The algorith used is for the CRC-16-CCITT, also known as CRC-KERMIT.	5 år sedan
Bernd Gottschlag	30fe01bb9e	Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.	5 år sedan
Bernd Gottschlag	3dcfae6196	Change the way the TX and RX addresses are written to the nrf24l01	5 år sedan
Bernd Gottschlag	fa580c8af7	Add ToDos to the schematic Several issues were found after receiving the PCBs that should be rectified for the next version.	5 år sedan
Bernd Gottschlag	e7bfca4363	Use the IRQ signal from the nrf24l01 instead of polling the status This is done to avoid transmission erros as described in https://forum.mysensors.org/topic/10452/nrf24l01-communication-failure-root-cause-and-solution	5 år sedan
Mathias Gottschlag	8f05bab10e	Implement reading values from the BME280.	5 år sedan
Mathias Gottschlag	7ad34f1038	Fix disabling display power.	5 år sedan
Mathias Gottschlag	3afa50a051	Rename display pins and group BME280 pins.	5 år sedan
Mathias Gottschlag	da228540d8	base-station: Simplify decryption.	5 år sedan
Bernd Gottschlag	ed128699b7	Implement cipher block chaining for the decryption of packets	5 år sedan
Mathias Gottschlag	62a7d7210a	display: Show dummy weather station values.	5 år sedan
Bernd Gottschlag	8f2658655e	Merge branch 'master' of git.gottschlag.net:bernd/smart-home	5 år sedan
Bernd Gottschlag	207868cdda	Add simple decryption of the data packets The cipher block chaining is not yet implemented	5 år sedan
Mathias Gottschlag	8a20cd3318	display: More drawing code.	5 år sedan
Mathias Gottschlag	86f451d51c	display: cargo update, and use tinygfx instead of embedded-epd library.	5 år sedan
Bernd Gottschlag	ae3b470844	Update packet handling protocol The packets are not yet encrypted	5 år sedan
Mathias Gottschlag	0d48079851	display: Restructure the program (with multiple software tasks).	5 år sedan
Mathias Gottschlag	e9f89f739f	display: Revert to simple EPD display example code.	5 år sedan
Mathias Gottschlag	d3cc04db76	display: Update toolchain.	5 år sedan
Mathias Gottschlag	a6b8646090	display: Fix pins/SPI and configure some default pin states.	5 år sedan
Mathias Gottschlag	ea8c4889f0	display: Fix project name and add epd-waveshare dependency.	5 år sedan
Bernd Gottschlag	dcd6ee4e24	Disable the MQTT connection	5 år sedan
Bernd Gottschlag	65f5893bc4	Change the address of the nrf24l01 and the packet format	5 år sedan
Bernd Gottschlag	a864df322d	Add further information to the README	5 år sedan
Mathias Gottschlag	9089fef433	Describe the remaining protocol.	5 år sedan
Mathias Gottschlag	1dde4df49d	More protocol description, enough to implement sensor reports.	5 år sedan
Mathias Gottschlag	3c0b03f73d	First part of protocol documentation.	5 år sedan
Bernd Gottschlag	b837785f8e	Add range checks for the received values and fix formatting	5 år sedan
Bernd Gottschlag	f7bfdf101c	Add definitions of the IRQ pin to the nrf24l01	5 år sedan
Bernd Gottschlag	1dd0f89149	Fix pin definitions of the interface to the nrf24l01	5 år sedan
Bernd Gottschlag	011303042b	Remove a variable that caused a compiler warning	5 år sedan
Bernd Gottschlag	f1b0ebf618	Move SPI initialization and pin definitions to spi.c	5 år sedan
Bernd Gottschlag	204ff8d220	Add power save mode and send messages every 7.5s	5 år sedan
Bernd Gottschlag	0c03c24fcd	Change the MCU to the Atmega88 The pin definitions are updated and the uart debug interface is removed as it is not present on the actual board.	5 år sedan
Bernd Gottschlag	ddb5b0426e	Send the data from the BME280 with the NRF24L01	5 år sedan
Bernd Gottschlag	01dff7cfd3	Use spi functions	5 år sedan
Bernd Gottschlag	93fd7841a9	Use spi functions	5 år sedan
Bernd Gottschlag	9d1b611356	Use dedicated function to read the status register when transmitting	5 år sedan
Bernd Gottschlag	fc26a37348	Set the transmission retries and time-out duration to each maximum	5 år sedan
Bernd Gottschlag	b9cfc34e94	Flush TX FIFO after an unsuccessful transmission	5 år sedan
Bernd Gottschlag	45f19e8c43	Fix register struct definitions	5 år sedan

Första Föregående 1 2 3 Nästa Sista

128 Incheckningar (0d7211d770aca81ffb8e77207d2c601ad5a100c3) Alla brancher Sök

128 Incheckningar (0d7211d770aca81ffb8e77207d2c601ad5a100c3)

Alla brancher