smart-home

説明なし

履歴

Bernd Gottschlag 30fe01bb9e Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.		5年前
..
BME280_driver @ 3d686a3265	Add reading from the BME280 using the official API	5年前
.gitignore	Update .gitignore	5年前
bme280_interface.c	Remove a variable that caused a compiler warning	5年前
bme280_interface.h	Add power save mode and send messages every 7.5s	5年前
compile.sh	Add prototyping code for sending a dummy message with the nrf24l01	5年前
led.h	Use the IRQ signal from the nrf24l01 instead of polling the status	5年前
main.c	Generate an ID according to the dip switches	5年前
makefile	Generate an ID according to the dip switches	5年前
nrf24l01.c	Generate an ID according to the dip switches	5年前
nrf24l01.h	Generate an ID according to the dip switches	5年前
nrf24l01_definitions.h	Change the way the TX and RX addresses are written to the nrf24l01	5年前
pin_programming.c	Generate an ID according to the dip switches	5年前
pin_programming.h	Generate an ID according to the dip switches	5年前
spi.c	Move SPI initialization and pin definitions to spi.c	5年前
spi.h	Move SPI initialization and pin definitions to spi.c	5年前