smart-home

Keine Beschreibung

Verlauf

Bernd Gottschlag 30fe01bb9e Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.		vor 5 Jahren
..
BME280_driver @ 3d686a3265	Add reading from the BME280 using the official API	vor 5 Jahren
.gitignore	Update .gitignore	vor 5 Jahren
bme280_interface.c	Remove a variable that caused a compiler warning	vor 5 Jahren
bme280_interface.h	Add power save mode and send messages every 7.5s	vor 5 Jahren
compile.sh	Add prototyping code for sending a dummy message with the nrf24l01	vor 5 Jahren
led.h	Use the IRQ signal from the nrf24l01 instead of polling the status	vor 5 Jahren
main.c	Generate an ID according to the dip switches	vor 5 Jahren
makefile	Generate an ID according to the dip switches	vor 5 Jahren
nrf24l01.c	Generate an ID according to the dip switches	vor 5 Jahren
nrf24l01.h	Generate an ID according to the dip switches	vor 5 Jahren
nrf24l01_definitions.h	Change the way the TX and RX addresses are written to the nrf24l01	vor 5 Jahren
pin_programming.c	Generate an ID according to the dip switches	vor 5 Jahren
pin_programming.h	Generate an ID according to the dip switches	vor 5 Jahren
spi.c	Move SPI initialization and pin definitions to spi.c	vor 5 Jahren
spi.h	Move SPI initialization and pin definitions to spi.c	vor 5 Jahren