Без опису
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.
Mathias Gottschlag 24c2f72cd1 display: Schematics. 5 роки тому
base-station/software base-station: Create empty software project. 5 роки тому
display display: Schematics. 5 роки тому
documentation Description of the basic synchronized network protocol. 5 роки тому
kicad-library display: Schematics. 5 роки тому
weather-sensor Add digikey link for a part 5 роки тому
.gitignore base-station: Create empty software project. 5 роки тому
README.md base-station: Create empty software project. 5 роки тому
cern_ohl_w_v2.txt Readme and licenses. 5 роки тому
gpl-3.0.md Readme and licenses. 5 роки тому

README.md

Smart Home

This repository contains the description of a number of smart home devices as well as the source code for the corresponding firmware.

Compiling

Compiling the display firmware requires a rust toolchain for ARMv6m:

rustup target add thumbv6m-none-eabi

Compiling the base station software depends on the targeted board. The following steps can be used to cross-compile the software for an ARMv7 target from a Fedora host:

  1. Install the toolchain:

    sudo dnf copr enable lantw44/arm-linux-gnueabi-toolchain
    sudo dnf install arm-linux-gnueabi-gcc.x86_64
    rustup target add arm-unknown-linux-gnueabi
    
  2. Configure Rust to use the ARM GCC:

    cat > ~/.cargo/config
    [target.arm-unknown-linux-gnueabi]
    linker = "arm-linux-gnueabi-gcc"
    
  3. Compile the software using the newly installed toolchain:

    cargo build --target=arm-unknown-linux-gnueabi
    

License

The hardware contained in this repository is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal, and the software is licensed under the GNU General Public License v3.