bernd
/
smart-home
Bevaka 1
Stjärnmärk 0
Förgrening 0
Kod Ärenden 1 Pull-förfrågningar 0 Släpp 0 Wiki Aktiviteter
Ingen beskrivning
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
42 Incheckningar
2 Grenar
Träd: 24c2f72cd1
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från '24c2f72cd1'
${ noResults }
smart-home
Mathias Gottschlag 24c2f72cd1 display: Schematics. 5 år sedan
base-station/software base-station: Create empty software project. 5 år sedan
display display: Schematics. 5 år sedan
documentation Description of the basic synchronized network protocol. 5 år sedan
kicad-library display: Schematics. 5 år sedan
weather-sensor Add digikey link for a part 5 år sedan
.gitignore base-station: Create empty software project. 5 år sedan
README.md base-station: Create empty software project. 5 år sedan
cern_ohl_w_v2.txt Readme and licenses. 5 år sedan
gpl-3.0.md Readme and licenses. 5 år sedan

README.md

Smart Home

This repository contains the description of a number of smart home devices as well as the source code for the corresponding firmware.

Compiling

Compiling the display firmware requires a rust toolchain for ARMv6m:

rustup target add thumbv6m-none-eabi

Compiling the base station software depends on the targeted board. The following steps can be used to cross-compile the software for an ARMv7 target from a Fedora host:

  1. Install the toolchain:

    sudo dnf copr enable lantw44/arm-linux-gnueabi-toolchain
sudo dnf install arm-linux-gnueabi-gcc.x86_64
rustup target add arm-unknown-linux-gnueabi

  2. Configure Rust to use the ARM GCC:

    cat > ~/.cargo/config
[target.arm-unknown-linux-gnueabi]
linker = "arm-linux-gnueabi-gcc"

  3. Compile the software using the newly installed toolchain:

    cargo build --target=arm-unknown-linux-gnueabi

License

The hardware contained in this repository is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal, and the software is licensed under the GNU General Public License v3.