smart-home

Struktur: 2325b6e49c

Autor	SHA1	Nachricht	Datum
Bernd Gottschlag	1381cb6634	Add encryption for the sent packet	vor 5 Jahren
Bernd Gottschlag	8a49c011c9	Update packet protocoll	vor 5 Jahren
Bernd Gottschlag	e435620c91	Add a new packet format with the calculation of the CRC	vor 5 Jahren
Bernd Gottschlag	30fe01bb9e	Generate an ID according to the dip switches The ID is used as the last byte of the RX address. It is also sent as a part of the data packet to allow assigning the sending station to a packet.	vor 5 Jahren
Bernd Gottschlag	e7bfca4363	Use the IRQ signal from the nrf24l01 instead of polling the status This is done to avoid transmission erros as described in https://forum.mysensors.org/topic/10452/nrf24l01-communication-failure-root-cause-and-solution	vor 5 Jahren
Bernd Gottschlag	f1b0ebf618	Move SPI initialization and pin definitions to spi.c	vor 5 Jahren
Bernd Gottschlag	204ff8d220	Add power save mode and send messages every 7.5s	vor 5 Jahren
Bernd Gottschlag	0c03c24fcd	Change the MCU to the Atmega88 The pin definitions are updated and the uart debug interface is removed as it is not present on the actual board.	vor 5 Jahren
Bernd Gottschlag	ddb5b0426e	Send the data from the BME280 with the NRF24L01	vor 5 Jahren
Bernd Gottschlag	e5ad15dbfa	Add reading from the BME280 using the official API Currently the data values are written to the debug output.	vor 5 Jahren
Bernd Gottschlag	780cedcbc4	Fix order of the bit fields of the register definitions	vor 5 Jahren
Bernd Gottschlag	33e1d5e700	WIP tidy up the NRF24L01 code	vor 5 Jahren
Bernd Gottschlag	347211065c	Add prototyping code for sending a dummy message with the nrf24l01 The firmware is developed using an aduino micro pro with an atmega32u4 as the hardware for the weather station is not ready yet.	vor 5 Jahren

13 Commits (2325b6e49cb5c3cf4709b5eec198216e8b60c878)