bernd
/
smart-home
Observar 1
Favorito 0
Fork 0
Código Issues 1 Pull requests 0 Versões 0 Wiki Atividade
Nenhuma descrição
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
40 Commits
2 Branches
Tag: dcd505b667
Branches Tags
${ item.name }
Criar branch ${ searchTerm }
de dcd505b667
${ noResults }
smart-home
Mathias Gottschlag dcd505b667 base-station: Create empty software project. 5 anos atrás
base-station/software base-station: Create empty software project. 5 anos atrás
display Rename base-station to display. 5 anos atrás
documentation Description of the basic synchronized network protocol. 5 anos atrás
kicad-library Add a dip switch and the associated footprint 5 anos atrás
weather-sensor Add digikey link for a part 5 anos atrás
.gitignore base-station: Create empty software project. 5 anos atrás
README.md base-station: Create empty software project. 5 anos atrás
cern_ohl_w_v2.txt Readme and licenses. 5 anos atrás
gpl-3.0.md Readme and licenses. 5 anos atrás

README.md

Smart Home

This repository contains the description of a number of smart home devices as well as the source code for the corresponding firmware.

Compiling

Compiling the display firmware requires a rust toolchain for ARMv6m:

rustup target add thumbv6m-none-eabi

Compiling the base station software depends on the targeted board. The following steps can be used to cross-compile the software for an ARMv7 target from a Fedora host:

  1. Install the toolchain:

    sudo dnf copr enable lantw44/arm-linux-gnueabi-toolchain
sudo dnf install arm-linux-gnueabi-gcc.x86_64
rustup target add arm-unknown-linux-gnueabi

  2. Configure Rust to use the ARM GCC:

    cat > ~/.cargo/config
[target.arm-unknown-linux-gnueabi]
linker = "arm-linux-gnueabi-gcc"

  3. Compile the software using the newly installed toolchain:

    cargo build --target=arm-unknown-linux-gnueabi

License

The hardware contained in this repository is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal, and the software is licensed under the GNU General Public License v3.