smart-home/README.md

Smart Home

This repository contains the description of a number of smart home devices as well as the source code for the corresponding firmware.

Compiling

Compiling the display firmware requires a rust toolchain for ARMv6m:

rustup target add thumbv6m-none-eabi

Compiling the base station software depends on the targeted board. The following steps can be used to cross-compile the software for an ARMv7 target from a Fedora host:

1. Install the toolchain:

   sudo dnf copr enable lantw44/arm-linux-gnueabi-toolchain
   sudo dnf install arm-linux-gnueabi-gcc.x86_64
   rustup target add arm-unknown-linux-gnueabi
   

2. Configure Rust to use the ARM GCC:

   cat > ~/.cargo/config
   [target.arm-unknown-linux-gnueabi]
   linker = "arm-linux-gnueabi-gcc"
   

3. Compile the software using the newly installed toolchain:

   cargo build --target=arm-unknown-linux-gnueabi
   

License

The hardware contained in this repository is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal, and the software is licensed under the GNU General Public License v3.