smart-home

説明なし

履歴

Bernd Gottschlag 4f83ec8bef Add handling of the salt On start-up the sensor sends a Get_Salt-message to the base station. The base station responds and sends the salt, which the sensor uses from there on.		5年前
..
BME280_driver @ 3d686a3265	Add reading from the BME280 using the official API	5年前
obj	Rework the makefile and optimize the code for flash space	5年前
.gitignore	Rework the makefile and optimize the code for flash space	5年前
bme280_interface.c	Rework the makefile and optimize the code for flash space	5年前
bme280_interface.h	Add power save mode and send messages every 7.5s	5年前
compile.sh	Add prototyping code for sending a dummy message with the nrf24l01	5年前
crc.c	Add a new packet format with the calculation of the CRC	5年前
crc.h	Add a new packet format with the calculation of the CRC	5年前
encryption.c	Fix decryption function	5年前
encryption.h	Add encryption for the sent packet	5年前
led.h	Use the IRQ signal from the nrf24l01 instead of polling the status	5年前
main.c	Add handling of the salt	5年前
makefile	Rework the makefile and optimize the code for flash space	5年前
nrf24l01.c	Add handling of the salt	5年前
nrf24l01.h	Add handling of the salt	5年前
nrf24l01_definitions.h	Add handling of the salt	5年前
pin_programming.c	Add delay after setting the pull ups for pin programming	5年前
pin_programming.h	Generate an ID according to the dip switches	5年前
spi.c	Move SPI initialization and pin definitions to spi.c	5年前
spi.h	Move SPI initialization and pin definitions to spi.c	5年前