bernd
/
smart-home
Прати 1
Волим 0
Креирај огранак 0
Код Дискусије 1 Захтеви за спајање 0 Издања 0 Вики Activity
Нема описа
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
57 Комити
2 Гране
Дрво: 201bf90392
Гране Ознаке
${ item.name }
Create branch ${ searchTerm }
from '201bf90392'
${ noResults }
smart-home
Mathias Gottschlag 201bf90392 base-station: Add code to receive packets using the NRF24L01 module. пре 5 година
base-station/software base-station: Add code to receive packets using the NRF24L01 module. пре 5 година
display display: Misc fixes. пре 5 година
documentation Description of the basic synchronized network protocol. пре 5 година
kicad-library kicad-library: Add more footprints. пре 5 година
weather-sensor Add digikey link for a part пре 5 година
.gitignore base-station: Create empty software project. пре 5 година
README.md base-station: Create empty software project. пре 5 година
cern_ohl_w_v2.txt Readme and licenses. пре 5 година
gpl-3.0.md Readme and licenses. пре 5 година

README.md

Smart Home

This repository contains the description of a number of smart home devices as well as the source code for the corresponding firmware.

Compiling

Compiling the display firmware requires a rust toolchain for ARMv6m:

rustup target add thumbv6m-none-eabi

Compiling the base station software depends on the targeted board. The following steps can be used to cross-compile the software for an ARMv7 target from a Fedora host:

  1. Install the toolchain:

    sudo dnf copr enable lantw44/arm-linux-gnueabi-toolchain
sudo dnf install arm-linux-gnueabi-gcc.x86_64
rustup target add arm-unknown-linux-gnueabi

  2. Configure Rust to use the ARM GCC:

    cat > ~/.cargo/config
[target.arm-unknown-linux-gnueabi]
linker = "arm-linux-gnueabi-gcc"

  3. Compile the software using the newly installed toolchain:

    cargo build --target=arm-unknown-linux-gnueabi

License

The hardware contained in this repository is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal, and the software is licensed under the GNU General Public License v3.