Add the calculation of a crc

The algorith used is for the CRC-16-CCITT, also known as CRC-KERMIT.

weather-sensor/firmware/crc.c

@@ -0,0 +1,53 @@
+#include <stdint.h>
+#include <avr/pgmspace.h>
+
+const uint16_t crcTable[256] PROGMEM =
+{
+	0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
+	0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
+	0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
+	0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
+	0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
+	0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
+	0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
+	0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
+	0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
+	0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
+	0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
+	0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
+	0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
+	0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
+	0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
+	0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
+	0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
+	0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
+	0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
+	0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
+	0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
+	0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
+	0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
+	0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
+	0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
+	0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
+	0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
+	0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
+	0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
+	0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
+	0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
+	0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
+};
+
+
+uint16_t Calculate_Crc(const uint8_t *buffer, uint8_t size)
+{
+	uint16_t crc = 0;
+	const uint8_t * tempPointer = buffer;
+
+	for (uint8_t i = 0; i < size; i++)
+	{
+		crc = (crc >> 8) ^ crcTable[ (crc ^ (uint16_t) *tempPointer) & 0x00FF ];
+		tempPointer++;
+	}
+
+	return crc;
+}

weather-sensor/firmware/crc.h

@@ -0,0 +1 @@
+uint16_t Calculate_Crc(const uint8_t *buffer, uint8_t size);

weather-sensor/firmware/makefile

@@ -7,8 +7,8 @@ clean:
 flash: main.hex
 	sudo avrdude -c buspirate -b 115200 -P /dev/ttyUSB1 -p m88p -v -U flash:w:main.hex
 
-main: main.c spi.c spi.h nrf24l01.c nrf24l01.h nrf24l01_definitions.h bme280_interface.c bme280_interface.h BME280_driver/bme280.c BME280_driver/bme280.h led.h pin_programming.c pin_programming.h
-	avr-gcc main.c spi.c nrf24l01.c bme280_interface.c BME280_driver/bme280.c pin_programming.c -I BME280_driver -o main -mmcu=atmega88p -Os -Wall -Wextra -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -DF_CPU=1000000UL -D BME280_32BIT_ENABLE
+main: main.c spi.c spi.h nrf24l01.c nrf24l01.h nrf24l01_definitions.h bme280_interface.c bme280_interface.h BME280_driver/bme280.c BME280_driver/bme280.h led.h pin_programming.c pin_programming.h crc.c crc.h
+	avr-gcc main.c spi.c nrf24l01.c bme280_interface.c BME280_driver/bme280.c pin_programming.c crc.c -I BME280_driver -o main -mmcu=atmega88p -Os -Wall -Wextra -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -DF_CPU=1000000UL -D BME280_32BIT_ENABLE
 
 main.hex: main
 	avr-objcopy -O ihex -R .eeprom main main.hex